What it actually does
A full list of what the software does, so you can check whether the one thing you need is in here. If it is not on this page, ask — we would rather tell you no than be vague.
Customers, cars and the front counter
- Duplicate customer check
- As a new customer's details are typed, the system searches your existing records on telephone number and email and shows any close match before the form is finished. Inbound messages are matched the same way, so somebody contacting you for the first time by text is attached to the record you already hold. Duplicate records divide a vehicle's service history between two files, which makes that history unreliable at the moment you most need it.
- Look a car up by its VIN
- Entering a VIN fills in the year, make, model, trim and engine automatically. You can also choose a make and model from a maintained list, with vehicles already on your books offered first. Decoding the VIN instead of typing the vehicle removes transcription errors from the record that parts ordering and service history both depend on.
- One search box for everything
- One search field covers job numbers, customer names, registration plates and telephone numbers, and returns results from both current work and imported history. Whoever answers the telephone does not know in advance which of those they will be given, so holding them in separate searches costs time on every call.
- Customer requests, in their words
- The customer's own description of what they want is recorded on the job, together with any documents or photographs they provide, and prints at the top of their estimate and invoice. A second field records what you advised. Holding both gives you a written account of what was asked for and what was recommended, in the words each party used.
- Add a customer, car and estimate in one go
- A customer record, their vehicle and an estimate can be created in one sequence from anywhere in the software, with keyboard shortcuts for staff who do it many times a day. They are created together because they are almost always needed together, and entering them separately is where details are missed.
Quoting and invoicing
- Labor, parts, sublet and fees
- Each line type carries the fields it needs: hours and rate on labor; part number, vendor, cost and price on parts; the subcontractor on sublet. Lines are grouped into sections you name, and each section carries its own subtotal. Separating the types is what makes your margin on parts and your labor sold measurable, rather than combined into a single figure.
- Discounts
- A discount can be applied to one line or across an entire order, as a percentage or a fixed amount. It is deducted before shop supplies and sales tax are calculated. Applying it in that order means tax is never charged on money the customer did not pay, which is both correct and defensible if the figures are later questioned.
- Card fees and shop supplies
- A card or finance surcharge can be added as a percentage of the order total, calculated last so that two percentage fees never compound. Shop supplies can be a fixed amount or a percentage of labor with an upper cap, and can be switched off on any individual job. Both are calculated by the system rather than added by hand, so the same work always produces the same total.
- Sales tax
- Sales tax is applied to parts for in-state customers at the rate you set, determined from the customer's address and able to be overridden on a job or on a single line. Deriving it from the address rather than asking on every estimate removes a judgement that is easy to get wrong and costly to get wrong repeatedly.
- No save button on a quote
- A quote is written to the server about a second after typing stops, and the screen states when the last save happened. There is no save action to forget. Estimates are usually built in interruptions, and a save button is the point at which that work is lost.
- Hide a section to show a lower price
- Any section of a quote can be set aside, which removes it from every total, and restored in one action. Shop supplies and tax recalculate with it. This lets you show a customer the price with and without a package of work without rebuilding the estimate or creating a second version of it to keep track of.
- A link the customer can approve from
- Every job has a private link that always shows its current state. The customer approves or declines each section individually, and a declined section remains visible but is removed from the total. The printed version carries your letterhead, your terms and your wording. A written approval recorded per section, with a date against it, is the record that settles a later disagreement about what was authorised.
- Deposits and payments
- Deposits and partial payments are recorded against the job with the date the money was received, which is not always the date it was entered. A mistyped payment is corrected in place rather than voided and re-entered, and every correction is logged with who made it. A void followed by a new entry reads as a refund and a second payment, which is not an accurate account of what happened.
The bay
- Clocking onto a job
- A technician clocks onto a specific labor line rather than a general timer, so every hour recorded belongs to an identified piece of work. One person cannot be clocked onto two lines at once, and that is enforced by the database rather than by the screen. Time attached to a line is what makes job costing and flat-rate payroll possible without anyone reconstructing the week afterwards.
- Book time against actual time
- Each labor line carries the hours it was quoted at. The technician's screen changes at 80% of those hours and again at 100%, and a note is required before the clock can be stopped on a line that has run over. Lines billed as time and material are exempt. Knowing a job is running long on the day it happens is what allows you to speak to the customer before the work is finished rather than after.
- Approving time over the quote
- Hours beyond the quoted figure are held in a queue for a manager, who either bills them to the customer, absorbs them, or declines them with a stated reason. The technician can see the decision and the reason for it. Making the decision explicit, and visible to the person it affects, prevents the quiet disputes over pay that flat rate otherwise produces.
- Clocking in with no signal
- Punches, notes and photographs are written to the device first and transmitted when a connection returns. Both the time of the action and the time it reached the server are stored, pay is calculated from the first, and a large gap between the two is flagged for review. Software that needs a connection to record a punch will lose hours worked in the parts of a building where there is no signal, and will do so without telling anybody.
- Who is clocked in right now
- A live view shows everyone currently clocked in, the job they are on and the elapsed time, with the rest of the team listed alongside so a manager can clock somebody in from the same screen. Anyone past ten hours is highlighted. Entries of that length are nearly always a forgotten punch, and they are far easier to correct on the day than at the end of the week.
- Fixing a punch
- A manager can amend a punch; a technician cannot amend their own. Every amendment stores the original value, the new value, who made the change and the reason given, and the technician can read that record. A timesheet that can be altered without trace is not evidence of anything, and the people paid from it are entitled to see what changed.
- Digital inspections
- You define your own inspection sheets. A technician records each item as good, needs attention soon, needs attention now, or not applicable, and can attach a note and photographs. Each item is timestamped as it is answered rather than when the sheet is submitted. The sheet is copied onto the job when it is started, so revising a template later does not alter inspections already carried out.
- A tech can flag a job for you
- From the job screen a technician can mark the work complete or request assistance, and the flag appears for whoever is monitoring the board. A direct signal from the floor removes the walk to the office and makes the real state of a job visible to the people scheduling it.
Parts and scheduling
- Parts ordering
- Every part that is on order or still outstanding appears in a single list, with its vendor, part number, cost and the job it belongs to. You can view that list grouped by vendor or by vehicle, change the status of many parts in one action, and reverse a bulk change in a single press. Because the status lives on the job rather than in somebody's head, any member of staff can answer what a vehicle is waiting on without finding the person who placed the order.
- Part requests from technicians
- A technician can request a part directly from the job they are working on, and the system requires a reason for the request. The request goes to whoever prepares quotes and does not become a line on the customer's estimate until a price has been entered. This protects the authorised total: no part can reach a customer's bill without somebody pricing it first, and the reason for every request is kept on the record.
- Shop supply restock list
- Consumables that are not billed to a particular vehicle are tracked on their own list, separate from job parts. Anyone in the shop can add an item, and whoever handles purchasing works from the same list. Keeping these apart from job parts means shop supplies never distort the cost of a job, while still being reordered reliably.
- Two separate calendars
- One calendar shows when vehicles are arriving and leaving; the other shows which technician is assigned to which job. They are deliberately separate because they answer different questions, and a vehicle being in the shop is not the same as somebody working on it. A job longer than a day is laid out automatically across your working days, skipping the days you are closed, and rescheduling it moves every day of that booking together.
- Technician capacity
- When you assign work, you see that technician's existing bookings day by day for the next three weeks, measured against the daily capacity you set for them. The system does not prevent you from assigning more than a full day, because sometimes that is a deliberate decision. It makes the overload visible before you commit to a completion date, rather than after you have promised one.
- Non-vehicle calendar entries
- Holiday, sick days, vendor appointments, training and meetings can all be recorded on the calendar alongside vehicle work. They appear on both calendars, so scheduling decisions reflect who is genuinely available rather than only which vehicles are booked in.
Payroll, reports and the books
- Weekly payroll
- For each technician the report shows book hours earned, hours actually clocked, efficiency and pay for the week, calculated from the punches already recorded. Entries that need attention are listed first. Because it derives from the punches the floor created during the week, there is no separate timesheet to collect, interpret or re-enter.
- Two techs on the same job
- Where two technicians work the same labor line, its book hours are divided between them in proportion to the time each actually worked. The weekly figures sum to the line's total hours regardless of how many weeks the job spans. This allows shared work to be paid correctly under flat rate without a manager apportioning it by hand.
- Pay rates per person
- Each technician has a flat-rate book rate, and each member of staff has an hourly rate, set independently of one another. A service writer performs no flat-rate work, so paying them from a technician's base rate produces the wrong figure. Holding both rates against each person means a single payroll run covers the whole shop.
- End of day report
- A single page showing money collected and by which method, estimates written, work authorised, invoices raised, and hours and efficiency for the day. It contains no pay figures at all. That omission is deliberate, and it is what makes the report safe to print, display or hand to the floor.
- Sales and profit
- Sales are counted per job on the invoice date, so the figures reconcile with your accounts. The report shows margin on parts and sublet, and gross profit after technician pay. Using the invoice date rather than the date the work was done is what allows this report and your bookkeeping to agree without adjustment.
- Sales targets by item, not just dollars
- Targets can be set as a count of a particular item, category or line type, for an individual or for the whole shop, as well as by revenue. Close rate is reported for each service writer. Much of what a shop wants to sell more of is counted rather than valued, and a revenue target does not tell you whether those things were sold.
- Sync with QuickBooks
- Customers, invoices and payments are sent to QuickBooks automatically. Before creating a customer it searches your existing QuickBooks records by email and telephone, links the ones it can match with confidence, and reports the ones it cannot rather than guessing. You choose which accounts each line type posts to, and the date from which the sync begins.
Talking to each other
On every plan, working the day you start. Only messages that reach a customer sit on a higher one.
- Internal job updates
- Technicians post findings and photographs to the job, visible to everyone in the shop and never to the customer. Updates are written to the device before being sent, so they survive an area with no signal. Keeping this record on the job puts the account of what was found in the same place as the work, rather than in a message thread nobody can search later.
- Team chat
- A single channel for the whole shop, direct messages between individuals, and named groups, each carrying photographs and file attachments. Having it in the same system as the jobs means a conversation about a vehicle can be attached to that vehicle rather than living on somebody's phone.
- Tag someone by name
- Tagging an individual, or everyone, in a chat message or a job update places it on that person's own notification list as well as in the conversation. A question addressed to a particular person otherwise scrolls out of view in a busy channel and goes unanswered.
- Notifications on their phone
- A tagged member of staff receives a notification on their phone, but only while they are clocked in. The message is waiting for them either way. Restricting notifications to working hours is what stops staff turning them off altogether, at which point the feature stops working on the occasions that matter.
- Internal notes cannot reach a customer
- No function anywhere in the software sends the text of an internal note to a customer. This is a property of how the system is built rather than a policy staff are asked to observe, which means it cannot be defeated by a mistake made under pressure.
Talking to customers
On the Plus and Ultimate plans. Talk to us about connecting your own number and mailboxes.
- Text and email in one inbox
- Texts and emails arrive in a single thread per customer, with each channel colour-coded. You can connect several telephone numbers and mailboxes, and a reply is sent from whichever one the customer used. Facebook and Instagram are coming later. One thread per customer means the whole conversation is in one place regardless of how each message arrived.
- One thread per customer
- A customer's telephone number and email address resolve to the same record, so messages sent by different means stay together. Without this the same person appears as two contacts, and their history is divided between them from the first time they use the other channel.
- Reminders when a customer is waiting
- A job is marked amber as soon as a customer is awaiting a reply, and red once two hours have passed. A repair order with no customer contact for a week is flagged on the board. Both are measured from the messages themselves, so they do not depend on anyone remembering to set a reminder.
- Message templates
- You write your own templates, with separate wording for email and for text, which fill in the customer and vehicle details automatically. The approval link and a PDF can be attached, and one message can be sent on more than one channel at once. Templates keep what the shop says consistent between staff without preventing anyone from editing a message before it goes.
- Send a tech's photos to the customer
- Photographs from a technician's internal update can be selected and sent to the customer with a message you write. The technician's own notes remain internal. This separates the evidence, which is often worth showing a customer, from the internal commentary, which is not.
The AI
On the Ultimate plan, off until you switch it on.
- Nothing is ever sent automatically
- Everything the AI produces is placed in a queue for review, where it can be edited, and is sent only when a person chooses to send it. No automated message reaches a customer. The value of a drafted message is the time it saves writing one, not the removal of the decision to send it.
- It cannot invent a price
- The AI is given your saved items without their prices and may only select which of them apply. Every figure on the resulting estimate is read from your own catalogue afterwards. This is a structural limit rather than an instruction: having never been shown a price, it has none to get wrong.
- Drafted progress updates
- Where a vehicle has been in the shop a week with no customer contact, the system drafts an update from the job itself: the labor lines, the parts and their status, and any completed inspections. It is never given internal notes, so it cannot repeat one to a customer. The draft is a starting point for the service writer rather than a replacement for them.
- Sorting the inbox for you
- Each incoming message is assessed, and most require no action at all, which is the correct answer in the majority of cases. Messages that are genuine enquiries become a draft estimate built from your own prices. Every decision is recorded with its reasoning, so you can review what was set aside and why rather than taking it on trust.
- You write its rules
- When you disagree with a decision, you write the reason in your own words and it becomes a standing instruction applied to every message from then on. There is no retraining involved and no waiting on us to change anything.
Your shop's data
- Your data is separate from every other shop's
- Separation between shops is enforced by the database itself, not by filters in the application that a later change could omit. It was built that way before the system held more than one shop, which is the only point at which it can be done reliably.
- We cannot read your jobs or customers
- Support staff can see counts and dates, not your customers, your quotes or your messages. If you ask us to investigate something you grant access for a period you choose, it expires automatically, and you can read a record of everything that was viewed. Access that is granted, time-limited and logged is the only kind you can audit afterwards.
- Backed up every twenty minutes
- Your records and your photographs are copied off-site every twenty minutes, to storage that retains every version and from which nothing is deleted. A nightly backup leaves a day's work at risk for most of the working day.
- Your data is yours to take with you
- You can export your data at any time, and if you leave you take it with you. We have been on the other side of that, and the software is built on the assumption that you may one day want to.
Is the thing you need on here?
If it is not, tell us what it is. We are small enough that a genuinely useful addition can be built in weeks rather than added to a roadmap.